316L Porous Metal Element | Ø11.9 × ID9.1 × H15.5 mm
A compact porous stainless steel component for compatible gas sensor protection, particulate filtration and gas diffusion applications. Available for OEM evaluation and customized component projects.
HENGKO manufactures sintered stainless steel components using metal powder sintering technology. The resulting porous structure provides a passage for gas flow while offering a rigid metallic enclosure for compatible sensing elements.
This Ø11.9 mm component is suitable for engineering evaluation where compact dimensions, porous metal construction and integration into an existing instrument assembly are required.
Physical Protection: Provides a rigid porous barrier around compatible sensor components.
Gas Exchange: Allows gas to pass through the interconnected porous structure.
Particulate Filtration: Can help intercept particles according to the actual media retention characteristics.
The following dimensions and material are taken from the supplied product information.
| Parameter | Specification |
|---|---|
| Product Type | Porous cylindrical sensor housing / filter element |
| Material | Sintered stainless steel 316L |
| Listed Pore Grade | 30–45 μm |
| Outer Diameter (D) | 11.9 mm |
| Inner Diameter (ID) | 9.1 mm |
| Height (H) | 15.5 mm |
| Nominal Radial Wall Thickness | 1.4 mm (calculated from D and ID) |
| Customization | Dimensions and pore specifications subject to engineering review |
The source states that dimensional tolerances for most HENGKO models can be controlled within 0.05 mm; this is not a confirmed tolerance for this particular part. Request a dimensioned drawing and approved tolerances before production.
The sintering process bonds stainless steel powder into a rigid porous component. Its pore structure permits gas passage while the metal body provides mechanical support for compatible assemblies.
A sintered 316L structure suitable for evaluation as a compact industrial component.
Interconnected pores allow gas transfer through the metal wall, subject to pressure drop and media characteristics.
The Ø11.9 mm diameter and 15.5 mm height support evaluation for space-limited assemblies.
Discuss alternative dimensions, pore grades and assembly requirements for production projects.
The same porous metal component may serve different functions depending on how it is integrated into a finished device.
A potential housing component for compatible gas-detection or measurement assemblies requiring gas access and physical protection. Sensor response time and target-gas compatibility must be tested.
A porous metal cover or protective component for compatible instrumentation where particulate ingress and environmental exposure are design concerns.
Can be evaluated as a porous filtration element within a suitable housing or gas path. Filtration efficiency, sealing and pressure-drop requirements must be validated.
An option for applications requiring gas to pass through a distributed porous surface. Flow uniformity depends on media properties and operating conditions.
For sensor manufacturers and OEM equipment designers, pore grade alone is not enough to determine whether a component will perform as required.
01 / Sensor Compatibility — Confirm sensing principle, target gas and possible interactions with the metal housing.
02 / Gas Permeability — Evaluate whether the porous element allows sufficient gas exchange for the application.
03 / Filtration Requirement — Define particle size, retention efficiency and acceptable contamination levels.
04 / Assembly Dimensions — Check mating diameter, clearance, mounting method and tolerance requirements.
05 / Operating Conditions — Provide temperature, pressure, gas composition and environmental exposure.
06 / Production Volume — Share prototype quantity and expected recurring OEM demand.
If the standard D11.9 × ID9.1 × H15.5 mm component does not match your assembly, HENGKO can review custom drawings and requirements for alternative porous metal components.
OD, ID, height and geometry
Application-specific media selection
Assembly and mounting review
For repeat production, provide a dimensioned drawing, target pore grade, inspection criteria and forecast volume. These details help establish a consistent component specification.
HENGKO supplies porous sintered metal components for filtration, sensing and industrial equipment applications. We work with customers evaluating standard components and custom designs.
Certification applicability depends on the certificate scope and the specific product. Request relevant documentation for your procurement or quality requirements.
The listed dimensions are 11.9 mm outer diameter, 9.1 mm inner diameter and 15.5 mm height.
The original product title mentions 30 μm, while the specification heading states 30–45 μm. Confirm the required pore specification and its test method before ordering.
It may be suitable for compatible gas sensor assemblies, but gas diffusion, sensor response and target-gas compatibility require application testing.
The porous metal construction can support particulate filtration applications. Actual retention performance and pressure drop must be established for the selected media and operating conditions.
HENGKO offers OEM/ODM customization services and can review customer drawings for compatible sintered metal component projects.
Contact HENGKO to confirm sample availability, minimum order quantity, pricing and lead time for the selected specification.
Need a different pore grade, material or sensor protection configuration? Explore related HENGKO product families.
Porous protective components for compatible environmental sensors.
Housing components for compatible gas detection equipment.
Alternative flat porous metal elements for filtration applications.
Send your required dimensions, pore grade, application and estimated order quantity. Our team can review available specifications and OEM manufacturing options.
OD × ID × height, material, pore grade, gas type, operating conditions, drawing if available, sample quantity and estimated annual demand.
Email: ka@hengko.com