Porous Metal Flow Restriction Element for GC & Analytical Instruments
HENGKO H02K-00103 is a compact 316L stainless steel porous gas restrictor element designed for integration into laboratory gas pathways, analytical instruments and custom OEM gas control assemblies.
The HENGKO H02K-00103 gas flow restrictor uses a network of interconnected pores to create resistance to gas flow through the sintered metal structure.
Manufactured from 316L stainless steel, the featured element has a nominal pore grade of 3–5 μm and measures 5 mm in diameter by 3 mm in thickness.
It is designed for integration into compatible gas circuits where flow characteristics can be selected or verified under defined pressure and gas conditions.
Unlike a single-hole precision orifice, a porous metal restrictor allows gas to pass through interconnected microscopic pathways that create flow resistance.
Gas flow depends on differential pressure, gas properties, temperature, porous media permeability and element geometry. A 3–5 μm pore grade alone does not define a fixed flow rate or flow accuracy.
Interconnected metal pores provide resistance to gas passing through the restrictor element.
Corrosion-resistant metal construction for compatible laboratory and industrial gases.
Ø5 × 3 mm porous element for integration into appropriately designed compact gas assemblies.
Custom dimensions, pore grades and target flow requirements can be discussed for OEM projects.
The compact porous metal element can be integrated into compatible housings or flow passages. Correct mounting and sealing help prevent unwanted gas bypass around the restrictor.
Confirm housing dimensions, effective flow area, sealing method, operating pressure and gas compatibility before selecting a restrictor.
| Parameter | Specification |
|---|---|
| Model | H02K-00103 |
| Product Type | Porous Gas Flow Restrictor |
| Material | 316L Stainless Steel |
| Nominal Pore Grade | 3–5 μm |
| Diameter | 5 mm |
| Thickness | 3 mm |
| Structure | Sintered Porous Metal |
| Flow Rate | Application-Dependent |
| Operating Pressure | Confirm for Specific Assembly |
| Typical Applications | GC, Gas Analysis, OEM Instruments |
| Customization | Available on Request |
Note: Flow rate, maximum operating pressure and flow tolerance require verification under defined test conditions.
Porous metal gas restrictors can be considered for laboratory instruments, gas sampling equipment and OEM gas control systems where flow performance can be validated.
Candidate restriction elements for compatible GC gas circuits, subject to instrument validation.
Compact porous metal components for gas analysis and measurement equipment.
Flow resistance components for compatible sampling and instrument gas lines.
Custom porous metal elements for equipment manufacturers and integrated gas systems.
To select a suitable porous gas restrictor, define the operating conditions and target flow before confirming the element specification.
Gas Type: Air, N₂, He, H₂ or other specified gas.
Inlet Pressure: Include pressure units and gauge/absolute basis.
Outlet Pressure: Downstream operating pressure.
Target Flow Rate: sccm, mL/min or L/min with reference conditions.
Temperature: Normal operating range.
Flow Tolerance: Acceptable variation and order quantity.
HENGKO supports OEM development of porous metal elements for gas flow restriction, gas distribution and instrument integration.
Element dimensions, pore grade, material selection, installation requirements and target flow characteristics under defined test conditions.
The featured element has a nominal pore grade of 3–5 μm.
No. Flow depends on differential pressure, gas properties, temperature, permeability and element geometry.
It may be evaluated for compatible GC gas circuits, subject to flow performance, cleanliness and instrument requirements.
No. A porous restrictor uses interconnected flow passages, while a precision orifice typically uses a defined opening.
The porous structure may retain particles, but a specific filtration efficiency has not been established for this model.
Yes. Please provide gas type, inlet and outlet pressure, target flow rate, temperature, tolerance and quantity for technical review.
HENGKO manufactures sintered porous metal components for industrial filtration, gas distribution and flow control applications, including OEM projects.
Porous stainless steel components for filtration systems.
Additional porous metal media and element geometries.
Porous disc components for gas and liquid applications.
Send us your gas type, inlet and outlet pressure, target flow rate, temperature, dimensions and quantity for technical review.
Request Technical Review & QuoteEmail: ka@hengko.com