Corrosive Gas Filters 0.3micrometer for Semiconductor and Microelectronics Equipment Gas Purify System

HENGKO / INLINE FILTRATION COMPONENTS

All-Welded Stainless Steel Inline Gas & Liquid Filters

Compact straight-through filtration for instrumentation tubing, process gas lines and small-volume liquid systems.

Particles carried through gas or liquid lines can accumulate in regulators, valves, flow controllers and analytical instruments. HENGKO inline filters provide a compact filtration component that can be installed directly into compatible tubing or pipe connections.

Choose from sintered metal and pleated mesh filter element configurations, with compression fittings, NPT threads or male face seal connections to suit your equipment design.

Request Technical Quotation

CONSTRUCTION
All-Welded
FILTER MEDIA
Sintered / Pleated
CONNECTIONS
Tube / NPT / Face Seal

DESIGN & FUNCTION

A Compact Filtration Point Inside the Fluid Line

An inline filter places the filtration element within the flow path, allowing particles to be intercepted before they reach downstream components. Its short, straight-through arrangement is useful when installation space is limited.

All-Welded Housing Construction

The welded construction reduces the number of housing joints compared with designs using separable body sections. Leak integrity still depends on manufacturing quality, connection installation and appropriate testing.

Small Installation Footprint

The inline format can be integrated into instrumentation panels, compact gas manifolds and equipment tubing without requiring a large external filter vessel.

Filter Element Choices

Sintered and pleated element configurations offer different filtration characteristics. Selection should consider particle retention, flow demand, pressure drop and service conditions.

Reverse-Flow Cleaning Considerations

The original product information references reverse-flow cleaning. Cleaning suitability, pressure limits and validated reuse procedures must be confirmed for the selected element and application.

FILTER ELEMENT SELECTION

Sintered Metal or Pleated Mesh: Which Should You Specify?

The two element styles should be evaluated against the actual fluid, contamination profile and required filtration performance rather than nominal pore size alone.

OPTION A / SINTERED ELEMENT

0.5 μm Nominal Pore Grade

A porous sintered metal element is listed for selected 0.5 μm configurations. It may be considered when a compact, rigid porous element is required, subject to pressure drop and filtration validation.

OPTION B / PLEATED ELEMENT

Multiple Nominal Pore Grades

Pleated mesh configurations are listed with multiple nominal pore options. The source contains inconsistent values of 2.7 μm versus 2 and 7 μm; the exact available grades require confirmation.

Nominal pore size does not by itself establish absolute particle retention efficiency or suitability for semiconductor ultra-high-purity gas service.

INSTALLATION INTERFACES

Connection Options for Different Tubing Systems

Connection selection is critical to assembly compatibility. The product range includes the following configurations.

Compression Tube Fittings

Options for 1/4-inch and 6 mm tubing connections, depending on the model.

NPT Threaded Ends

Female, male and male-to-female 1/4-inch NPT connection arrangements are listed.

Male Face Seal Connections

1/4-inch male face seal configurations for compatible gas line assemblies. Confirm mating geometry, gasket and installation requirements.

MODEL & DIMENSION REFERENCE

Inline Filter Model Selection Table

The following dimensions and part-number prefixes are taken from the original product information. Confirm the complete ordering code and drawing before purchase.

ConnectionSizePore Grade (μm)Part Number / PrefixOrificeA Length
Compression 1/4" 0.5 HG-SS-4FWS- 4.75 mm 53.1 mm
Compression 1/4" 2 / 7 / 15* HG-SS-4FW- 4.75 mm 54.6 mm
Compression 6 mm 0.5 HG-SS-6FWS-MM- 4.75 mm 54.1 mm
Compression 6 mm 2 / 7 / 15* HG-SS-6FW-MM- 4.75 mm 54.6 mm
Female NPT 1/4" 2 / 7 / 15* HG-SS-4FW4- 11.5 mm 39.9 mm
Male NPT 1/4" 2 / 7 / 15* HG-SS-4FW2- 7.14 mm 48.0 mm
Male/Female NPT 1/4" 2 / 7 / 15* HG-SS-4FW5- 7.14 mm 43.7 mm
Male Face Seal 1/4" 0.5 HG-SS-4FWS 4.75 mm 50.8 mm
Male Face Seal 1/4" 2 / 7 / 15* HG-SS-4FW 4.75 mm 51.8 mm

*The original specification table lists 2, 7 and 15 μm, while the introductory text lists 2.7 and 15 μm. These values should be reconciled against the manufacturer's current datasheet before final publication.

APPLICATION ENGINEERING

Typical Inline Gas and Liquid Filtration Applications

These compact filters may be evaluated for particle protection in several types of industrial fluid systems. Each application requires a review of pressure, media compatibility, filtration performance and cleanliness requirements.

Analytical Instruments and Gas Chromatography

Inline particle filtration in laboratory gas lines can help protect sensitive flow-control components and analytical equipment. Carrier-gas purity requirements may require additional purification technologies.

Semiconductor Equipment Gas Lines

Potential installation in compatible gas cabinets and equipment distribution lines. Semiconductor UHP use requires verified particle efficiency, outgassing, cleanliness, leak testing and materials documentation.

Chemical and Petrochemical Instrumentation

Particulate protection for downstream regulators, valves and instruments handling compatible process gases or liquids. Chemical resistance depends on all wetted materials.

Pressure and Flow Control Panels

Compact filtration upstream of pressure regulators, flow controllers and sensing components where small installation dimensions are important.

Pharmaceutical and Biotech Utilities

Particulate filtration in suitable non-sterile utility gas or liquid circuits. Sterile filtration, sanitary design and GMP requirements require separate qualification.

Food and Beverage Gas Systems

Possible particle protection in compatible CO₂ or nitrogen distribution systems, subject to food-contact, gas purity and cleaning requirements.

Hydrogen and Energy Equipment

Particle filtration upstream of compatible sensors and mass flow controllers. Hydrogen service requires specific pressure, materials and leak-integrity validation.

Vacuum and Sampling Lines

Inline protection for sampling instruments and compatible vacuum-related circuits where particle migration is a concern.

BEFORE YOU ORDER

Six Parameters That Determine the Right Inline Filter

01. Fluid Type

Gas or liquid, chemical composition and contamination characteristics.

02. Filtration Requirement

Target particle size, retention efficiency and cleanliness requirements.

03. Flow and Pressure Drop

Operating flow rate and acceptable differential pressure.

04. Pressure and Temperature

Maximum working pressure, temperature range and pressure cycling.

05. Connection Type

Compression, NPT or face seal interface and mating component details.

06. Project Quantity

Prototype requirements, planned annual demand and documentation needs.

TECHNICAL FAQ

Common Questions About Inline Filters

What is an all-welded inline filter?

It is a filter assembly with welded housing construction and inline fluid connections, designed to intercept particles within a gas or liquid flow path.

What connection types are listed?

The product range includes compression tube fittings, NPT threaded connections and male face seal configurations.

Can the filter be cleaned and reused?

Reverse-flow cleaning is mentioned in the source information. Whether a specific assembly can be cleaned and reused depends on the element type, contamination and validated cleaning procedure.

Is a 0.5 μm inline filter suitable for UHP semiconductor gas?

Not on pore size alone. UHP applications require additional evidence for particle retention, cleanliness, outgassing, leak integrity and compatibility.

Can HENGKO provide a custom configuration?

Custom requirements can be submitted for technical review. Feasibility depends on connection geometry, filtration media, operating conditions and quantity.

HENGKO / OEM INLINE FILTRATION

Need an Inline Filter for Your Gas or Liquid System?

Send HENGKO your fluid type, required pore grade, pressure, flow rate and connection details. Our team can review suitable standard models or discuss custom filtration requirements.

Request an Inline Filter Quote

Email: ka@hengko.com


Corrosive Gas Filters 0.3micrometer for Semiconductor and Microelectronics Equipment Gas Purify System Related Video: