10 μm Sintered Stainless Steel | Ø4.8 × 1.53 mm
Compact sintered metal frit components for compatible chromatography column assemblies. Designed for OEM evaluation where controlled fluid passage, mechanical support and precise dimensional fit are essential.
HPLC column frits are porous components installed at designated locations within chromatography column assemblies. They provide a fluid passage while helping retain packing material when the selected pore structure is compatible with the stationary phase.
HENGKO offers compact sintered stainless steel components for chromatography equipment and OEM applications. This model features a listed 10 μm pore grade and a compact Ø4.8 × 1.53 mm format.
Frit pore size must be selected according to the chromatography column design and packing particle size. A 10 μm frit should not be assumed suitable for retaining conventional small-particle analytical HPLC packing without validation.
The following specifications are based on the supplied product information. Additional performance parameters are available for review during engineering selection.
| Parameter | Specification |
|---|---|
| Product | HPLC Column Endcap Frit Filter |
| Listed Pore Grade | 10 μm |
| Outer Diameter | 4.8 mm |
| Thickness / Height | 1.53 mm |
| Metal Material | Sintered stainless steel 316L (as described in source) |
| PEEK Option | PEEK-related construction mentioned; exact assembly to be confirmed |
| Application | Compatible chromatography column assemblies |
| Customization | OEM drawing and specification review |
Pressure rating, differential pressure, permeability, particle retention efficiency, surface finish and model-specific dimensional tolerances have not been provided. Request confirmed technical data before qualification.
The small disc geometry allows the frit to be integrated into compatible column end fittings and retaining structures. Accurate component dimensions and appropriate sealing are important to avoid bypass flow or mechanical interference.
A bonded metal pore network provides fluid passage through the frit.
The Ø4.8 × 1.53 mm dimensions support evaluation for compatible end fitting geometries.
A commonly used material for chromatography fluid-contact components, subject to solvent compatibility.
Alternative geometry and pore specifications can be discussed based on customer drawings.
Column end frits are small but important components in liquid chromatography hardware. Their performance depends on pore structure, fit, cleanliness and compatibility with the complete column design.
When correctly selected, a frit helps prevent stationary-phase particles from escaping the packed bed.
The porous structure permits liquid flow through the column end assembly.
The frit works together with the end fitting and sealing geometry to support the intended fluid path.
Suitable pore structure and installation help minimize unwanted bypass or particle migration. Actual flow distribution and backpressure require testing.
For column manufacturers evaluating porous metal components for end fitting and packing retention designs.
For custom chromatography hardware requiring specific frit dimensions and mechanical integration.
For analytical equipment manufacturers seeking miniature porous stainless steel parts for validated fluid-path designs.
For customers developing compatible replacement components using a reference sample or approved engineering drawing.
HENGKO can review OEM requirements for miniature sintered metal components, including alternative dimensions and pore specifications. A reference drawing or sample is recommended for technical evaluation.
Dimensions: Diameter, thickness, fit and allowable tolerances.
Porous Media: Required pore grade and verified retention characteristics.
Materials: Stainless steel grade and any required polymer integration.
Performance: Flow rate, pressure drop, cleanliness and solvent compatibility.
Production: Prototype quantity, inspection criteria and annual demand.
Before ordering a frit for a chromatography column, confirm the following engineering requirements.
| Selection Factor | Why It Matters |
|---|---|
| Pore Grade | Must be appropriate for the packing particle size and retention requirements. |
| Diameter & Thickness | Determine compatibility with the end fitting and sealing geometry. |
| Backpressure | Excessive restriction may affect system operation. |
| Material Compatibility | Frit material must suit the mobile phase and cleaning procedures. |
| Cleanliness | Residual particles and extractables may interfere with analytical use. |
| Pressure Conditions | The complete frit assembly must be qualified for the intended operating pressure. |
HENGKO manufactures porous metal components for filtration and instrumentation applications. Our engineering team can review customer drawings and specifications for miniature sintered parts.
Certificate coverage and product-specific quality documentation should be verified for the intended procurement requirements.
The listed size is 4.8 mm in diameter and 1.53 mm in thickness, with a 10 μm pore grade.
No. Frit selection depends on packing particle size, column construction and retention requirements. A 10 μm frit may not retain conventional fine analytical column packing.
The supplied description mentions sintered stainless steel 316L and PEEK. Confirm whether PEEK is part of a combined assembly or a separate material option.
The original product information describes high-pressure resistance but does not provide a tested rating. Pressure suitability must be confirmed for the complete installed assembly.
HENGKO can review customer drawings and requirements for customized sintered metal frit components.
Please provide diameter, thickness, pore grade, material, application, pressure conditions, required quantity and any available engineering drawing.
Explore alternative porous metal components for filtration and custom instrumentation applications.
Porous metal disc components for compatible filtration assemblies.
Alternative metal filtration media for application-specific engineering evaluation.
Contact HENGKO for 10 μm Ø4.8 mm sintered metal frit specifications, sample availability and OEM customization options.
Frit diameter, thickness, pore grade, column type, packing particle size, operating pressure, solvent system, required quantity and technical drawing.
Request Samples & OEM Quotation
Email: ka@hengko.com