HENGKO / INDUSTRIAL SENSOR SOLUTIONS
Digital Temperature, Relative Humidity & Calculated Dew Point
Compact industrial humidity sensor probe with RS485 / Modbus-RTU communication for environmental monitoring, industrial equipment and OEM control system integration.
RS485 / Modbus-RTU 0–100%RH Dew Point DataView Specifications Request a Quote
HUMIDITY RANGE 0–100%RH RH ACCURACY ±2%RH* DIGITAL OUTPUT RS485*Humidity accuracy listed at 25°C in the original product specifications.
01 / PRODUCT OVERVIEWThe HENGKO HT-800 series is a miniature digital temperature and humidity sensor probe designed for industrial monitoring and equipment integration.
The original product information describes an integrated Sensirion RHT-series temperature and humidity sensing component, providing temperature and relative humidity measurements with calculated dew point data.
Its RS485 / Modbus-RTU communication interface enables connection to compatible PLCs, DCS systems, industrial gateways and data acquisition equipment.
One Digital Probe. Three Environmental Parameters.Temperature measurement + Relative humidity measurement + Calculated dew point output.
02 / KEY FEATURESMiniature temperature and humidity sensing component for compact installations.
Modbus-RTU interface for compatible industrial monitoring systems.
Stainless steel protective structure designed to permit ambient air exchange.
Threaded mounting and shielded wiring for industrial equipment integration.
03 / SENSOR CONSTRUCTIONThe HT-800 combines a miniature sensing component, stainless steel threaded mounting connection and shielded electrical cable in a compact probe assembly.
COMPONENT 01
Integrated temperature and humidity sensing element for digital environmental measurement.
Measures: Temperature & RH Calculated Data: Dew Point Interface: RS485 / Modbus-RTU T + RH Integrated sensing SS Threaded mounting COMPONENT 02Metal threaded connection for mounting the probe into compatible equipment and measurement assemblies.
Material: Stainless Steel Purpose: Probe Installation Selection: Verify Thread Size COMPONENT 03Four-core shielded cable for power and RS485 signal transmission. Correct wiring and shielding help reduce electrical interference.
Type: Four-Core Shielded Standard Length: 3 m Function: Power & Communication 4-Core Shielded signal cableRefer to the dimensional drawing for the sensor assembly, mounting geometry and installation clearance.
04 / TECHNICAL SPECIFICATIONS
Reference specifications from the original product information. Confirm the current datasheet before final selection.
| Parameter | Specification |
|---|---|
| Model | HT-800 |
| Temperature Range | −20 to +60°C (original table) |
| Humidity Range | 0–100%RH |
| Temperature Accuracy | ±0.2°C (stated at 0–90°C; confirm) |
| Humidity Accuracy | ±2%RH at 25°C |
| Dew Point | Calculated output (original table: 0–60°C) |
| Power Supply | DC 4.5–12V (original table; confirm) |
| Power Consumption | Less than 0.1 W |
| Response Time | 10 s at 1 m/s airflow (criterion unspecified) |
| Communication | RS485 / Modbus-RTU |
| Baud Rates | 1200 / 2400 / 4800 / 9600 / 19200 bps |
| Default Baud Rate | 9600 bps |
| Serial Format | 8 data bits, 1 stop bit, no parity |
| Long-Term Stability | RH <1%RH/year; temperature <0.1°C/year (stated) |
| Cable | Four-core shielded, 3 m standard |
| Ingress Protection | Original text mentions IP65–IP67; verify exact model rating |
Original product text lists DC 4.5–24V, while the specification table lists DC 4.5–12V. Confirm the correct operating voltage before installation.
05 / RS485 COMMUNICATIONThe HT-800 uses RS485 communication with the Modbus-RTU protocol to transmit digital temperature, humidity and calculated dew point data.
HT-800 Sensor Probe RS485 A/B + DC Power PLC / DCS / Gateway / Data LoggerVerify supply voltage, RS485 A/B polarity, communication address, baud rate, cable shielding and Modbus register definitions before commissioning.
06 / APPLICATIONSThe HT-800 is intended for temperature and humidity measurement in compatible industrial monitoring and OEM systems.
Monitor environmental conditions in suitable equipment enclosures and machinery.
Collect temperature and relative humidity data for industrial monitoring systems.
Integrate sensor measurements with compatible PLC-based equipment.
Transmit measurement data to compatible industrial gateways and monitoring software.
07 / DEW POINT DATA
Dew point is the temperature at which air reaches saturation when cooled at constant pressure.
The HT-800 calculates dew point from temperature and relative humidity measurements, supporting environmental monitoring and condensation risk assessment.
Calculated Dew Point OutputHT-800 is a temperature and humidity probe with calculated dew point output, rather than a dedicated low-dew-point transmitter for very dry process gases.
08 / INSTALLATION GUIDANCEAir Exposure: Install the probe where it can sample representative ambient conditions.
Condensation: Avoid prolonged water accumulation unless the installation is approved for those conditions.
Electrical Connections: Follow the correct supply voltage, wiring and shielding requirements.
Outdoor Use: Confirm the exact ingress protection rating for the supplied model.
09 / OEM SUPPORTHENGKO can discuss integration requirements for industrial temperature and humidity measurement systems, including mounting geometry, cable length and communication settings.
What to Include in Your OEM Enquiry
Measurement range, required accuracy, supply voltage, installation environment, cable length, Modbus communication requirements, sample quantity and estimated annual volume.
10 / FREQUENTLY ASKED QUESTIONSIt measures temperature and relative humidity and provides calculated dew point data.
Yes. The product uses RS485 communication with the Modbus-RTU protocol.
Yes, provided the PLC or gateway supports the required RS485 communication settings and Modbus register mapping.
The original specifications list 9600 bps as the default baud rate.
Dew point is calculated from measured temperature and relative humidity.
Suitability depends on the specific model, its confirmed IP rating and installation conditions.
The original information describes a standard 3 m cable and states that longer lengths may be available. Confirm requirements with HENGKO.
11 / RELATED SOLUTIONSAlternative sensor construction for environmental monitoring requirements.
Porous Stainless Steel Sensor HousingProtective porous metal housing for compatible sensor assemblies.
Industrial Dew Point Measurement InstrumentsAlternative instruments for different dew point measurement requirements.
HENGKO / TECHNICAL SUPPORT & QUOTATIONContact HENGKO to confirm the latest HT-800 specifications, request Modbus communication documentation or discuss OEM integration.
Email: ka@hengko.com