Custom Gas Sparging Components for Liquid Aeration & Process Equipment
HENGKO develops porous sintered metal spargers for gas introduction into liquids. Our OEM components can be designed around the required gas flow, installation geometry and process conditions.
Gas Dispersion Liquid Aeration OEM FabricationSparger Selection Guide Request OEM Quote
FUNCTION Gas Sparging CONSTRUCTION Sintered Metal SUPPLY TYPE OEM / Custom 01 / PRODUCT OVERVIEWA sintered stainless steel sparger introduces gas through an interconnected network of pores. As gas passes from the porous surface into the surrounding liquid, it forms bubbles that disperse through the process medium.
Compared with a simple open-ended gas inlet, a porous diffuser provides multiple gas discharge locations. The resulting bubble distribution depends on the selected media and operating conditions.
Distributed Gas Release: Gas exits through a porous surface rather than a single open outlet.
Rigid Metal Construction: The sintered structure provides mechanical support in suitable process conditions.
Application-Specific Design: Porous media, geometry and connections can be reviewed for OEM systems.
02 / POROUS METAL CONSTRUCTIONSintered metal media is produced by bonding metal particles into a porous structure. The resulting component combines interconnected gas passages with a self-supporting metal body.
Gas travels through the porous structure before being released into the liquid.
A rigid construction suitable for evaluation in compatible industrial processes.
Component dimensions and mounting arrangements can be reviewed against OEM drawings.
Designed to work with compatible gas supply and liquid process equipment.
03 / GAS SPARGING PRINCIPLEGas sparging is a gas–liquid contacting process. A porous diffuser helps distribute incoming gas through multiple openings, supporting the intended gas dispersion arrangement.
STEP 01The process gas is supplied through a suitable inlet connection at the required pressure and flow rate.
STEP 02Gas flows through the interconnected pores of the sintered metal component.
STEP 03Gas exits into the liquid and forms bubbles whose size and distribution depend on the media and process conditions.
STEP 04Bubbles rise or circulate through the liquid according to vessel geometry, agitation and fluid properties.
Bubble size and gas transfer performance cannot be determined from nominal pore size alone. Project-specific testing is recommended.
04 / APPLICATIONSPorous metal spargers can be evaluated for a range of gas–liquid contacting operations. The appropriate design depends on gas type, liquid properties and process objectives.
Introduce process gases into compatible liquid reaction systems where gas dispersion is required.
Provide gas introduction for suitable cultivation or fermentation equipment. Cleaning, sterilization and biological compatibility require validation.
Distribute air or other compatible gases into liquids for process aeration applications.
Support custom experimental systems that require a defined porous gas introduction component.
Provide gas introduction in suitable stripping or conditioning processes, subject to process engineering evaluation.
05 / ENGINEERING SELECTION
A suitable gas sparger must be selected as part of the complete gas–liquid system, rather than by pore size alone.
| Parameter | Information Required |
|---|---|
| Gas Type | Air, nitrogen, oxygen, CO₂ or other process gas |
| Gas Flow Rate | Required operating and maximum flow |
| Liquid Medium | Composition, viscosity and relevant process properties |
| Temperature | Normal and maximum operating temperature |
| Pressure | Gas supply pressure, vessel pressure and liquid depth |
| Media Selection | Pore grade and required gas dispersion characteristics |
| Dimensions | Available installation space and required geometry |
| Connection | Thread, tube, flange or custom mounting interface |
| Cleaning | Fouling risk and required cleaning method |
The porous media affects gas distribution, but it is only one part of the sparging process. Engineers should evaluate the complete operating conditions when selecting a diffuser.
Smaller pores may support finer gas release under suitable conditions, but bubble diameter is not equal to the nominal pore diameter. Surface tension, gas flow and bubble coalescence also influence the result.
Gas must overcome the resistance of the porous media and the surrounding liquid pressure. Available gas supply pressure must be sufficient for the intended flow.
Fouling, deposits and changes in liquid composition can affect gas distribution over time. Cleaning and maintenance requirements should be considered during design.
07 / OEM CUSTOMIZATIONThe sparger shown on this page was developed as a customer-specific component. HENGKO supports OEM projects from engineering discussion and prototype evaluation through production planning.
Geometry & SizeReview required component dimensions and installation space.
Porous MediaSelect pore characteristics based on flow and dispersion requirements.
Metal MaterialConfirm stainless steel grade and compatibility with the process medium.
ConnectionsEvaluate the required connection and assembly interface.
Provide your sparger drawing, gas flow requirements, operating conditions, liquid composition and expected production quantity. HENGKO can review feasibility and available manufacturing options.
08 / MANUFACTURING SUPPORTHENGKO manufactures porous sintered metal components for industrial filtration, gas distribution and instrumentation applications. Our team works with OEM customers on application-specific component requirements.
For regulated or qualification-sensitive applications, request documentation relevant to the exact material, manufacturing process and supplied component.
09 / TECHNICAL FAQIt introduces gas into a liquid through porous metal media. Typical applications include compatible gas–liquid reactors, aeration systems and process equipment.
Not necessarily. Bubble size also depends on gas flow, liquid properties, surface tension, pressure and bubble coalescence.
HENGKO offers OEM customization and can review drawings, dimensions, media requirements and connection designs.
This product description identifies stainless steel but does not specify a grade. Confirm the required material grade for your process before ordering.
Selection depends on gas flow, liquid volume, vessel geometry, pressure, required dispersion and available installation space.
Reuse may be possible with a compatible cleaning method. Cleaning procedures depend on deposits, material compatibility and the finished assembly.
10 / RELATED PRODUCTSRelated porous metal components for compatible gas diffusion applications.
Sintered Stainless Steel Filter DiscsFlat porous metal components for custom fluid and gas systems.
Sintered Stainless Steel Cylindrical ElementsAlternative porous cylindrical elements for engineering evaluation.
HENGKO / OEM GAS SPARGER SOLUTIONSTell us your gas type, flow rate, liquid medium, operating pressure and installation requirements. HENGKO can help evaluate a suitable porous metal diffuser design.
Recommended RFQ DetailsApplication, gas type, gas flow, liquid composition, temperature, pressure, sparger dimensions, connection type, drawing, sample quantity and annual demand.
Email: ka@hengko.com